Product List

Mass Mixer

 
The Mass Mixer is ideally suitable for mixing of wet mass, dry powders with wet mass, etc. for the preparation of pharmaceutical mass for the preparations of tablets.
 
 
Salient Features:
 
  • The trough design is such as to evenly distribute the material throughout.
  • The unique blade design and placement facilitate in the mass moving completely from top to bottom and laterally from one end to the other without operator interference.
  • The open top design is suitable for addition of material while in operation and also for visual inspection.
  • The complete trough can be tilted for unloading of the material.

Ribbon Mixer

The Ribbon Mixer is suitable for mixing of wet mass, dry powder, dry powder with wet mass, etc, for the preparation of pharmaceutical mass for preparing tablets and similar other applications. The mass mixer gives through mixing due to its unique blade design and the angle of the blade.
 
Description
  • The mixer is provided with a U shaped trough with a centrally mounted shaft passing laterally through the trough. The shaft is provided with a set of blades welded at different angles each blades has a dedicated mixing function. The angle of the blades is such that through, efficient and complete mixing of the material takes place. The material due to the unique blade design is subjected to lateral as well as vertical motion and the complete material is rolled inside out and for bottom to top, due to which complete mixing takes place and a homogenous mass is obtained.
  • The control shaft is provided with gland packing at both ends for complete sealing.
  • The central shaft is coupled to a suitable gear box and a suitably powered motor. The complete assembly is mounted an bearing blacks bolted to the frame of the machine.
  • The machine is provided with a manual tilting mechanism of the side with gear mechanism for unloading the material into the collecting tray (motorized tilting for higher capacity models available as an option). The trough can be tilted in the front up to 90 Degrees by rotating the handle provided at the side.
  • The mixer is provided with a sliding and open able top  cover with safety guard so that the operator does not accidentally put the hand inside the trough when the machine is in operation. The top cover is provided with a limit switch to stop the machine as soon as the top cover is opened.
Salient Features
  • The trough design in such as to evenly distribute the material throughout.
  • The unique blade designs and placements facilitate in the mass moving completely from top to bottom and laterally from one end to the other without operator interference.
  • The open top design is such that addition of material while in operation and visual inspection is possible.
  • Limit switch provided for the top cover to stop the machine when the cover is lifted.
 
Technical Specifications:
 
Capacity (kgs) 50 100 150 200
Trough Capacity (Ltrs) 110 220 330 440
Working Capacity (Ltrs) 90 155 235 310
Motor (HP) 3 5 7.5 7.5
Shaft Speed (RPM) 35 35 30 30
X

Send us your enquiry